Capacity guide / essential-load backup

2 kWh
Power
Stations.

More reserve for your essentials. Match the battery to your outage duration before choosing a model.

Quick answer: A 2,048 Wh battery provides a 1,536 Wh planning energy budget under our efficiency and margin assumptions. That is 12.80 hours at 120 W, or 5.12 hours at 300 W.

2 kWh describes stored energy. Continuous W describes available running power. They are different checks.

2 kWh CAPACITY MATCHER

Recommended battery1.28 kWh
Selected planning runtime12.80 h
Raw load energy0.96 kWh
Selected energy budget *1.54 kWh

Battery target = average W × hours ÷ 0.90 × 1.20.
* Budget = rated Wh × 0.90 ÷ 1.20.

Full starting charge. No recharge assumed. 90% efficiency and 20% margin are planning assumptions. Average watts estimate energy; simultaneous running watts check continuous output. Starting surges still require a separate manufacturer check.

CHECK EACH MODEL’S FIT →
120 W / 8 HOURS
1.28 kWh

Room in a 2 kWh budget.

Illustrative office load. All three base capacities meet this energy target. Device compatibility and startup behavior still need checking.

300 W / 8 HOURS
3.20 kWh

More storage needed.

A constant 300 W load for eight hours exceeds every base capacity in this shortlist under the same assumptions.

1,500 W / 2 HOURS
4.00 kWh

Heat spends energy quickly.

A constant high-draw appliance may fit the running-power limit but exhaust the energy budget before the intended duration.

Specification shortlist / U.S. base units

Compare the 2 kWh Class.

Three similar energy capacities, with different output and recharge limits. Use the fit results to narrow the shortlist for your own inputs.

Higher rated AC output in this shortlist

BLUETTI Elite 200 V2

Rated battery2,073.6 Wh
Continuous AC2,600 W

Compare when simultaneous running power matters. Confirm startup requirements and connector limits for the exact load.

CHECK OFFICIAL MODEL →
Balanced capacity and running power

EcoFlow DELTA 3 Max

Rated battery2,048.0 Wh
Continuous AC2,400 W

Compare this exact base model and its ports. DELTA 3 Max Plus is a different variant; check the full name before ordering.

CHECK OFFICIAL MODEL →
Lower listed carry weight in this trio

Jackery Explorer 2000 v2

Rated battery2,042.0 Wh
Continuous AC2,200 W

At a listed 17.9 kg, this is the lighter base unit of these three. Check handling, charging inputs and the full accessory package.

CHECK OFFICIAL MODEL →

Generic illustrations, not product photographs. Specifications reviewed October 4, 2026. No hands-on testing or universal winner is claimed. Check current availability and the exact model variant.

Runtime changes with the load

The Same Battery. Very Different Hours.

Calculated planning runtime for a 2,048 Wh base battery. These constant-load illustrations include efficiency and reserve.

60 W average25.60 h
120 W average12.80 h
300 W average5.12 h
1,000 W average1.54 h
1,500 W average1.02 h

At very low loads, standby losses can reduce actual runtime more than this simplified model predicts. For cycling appliances, use a measured average rather than the running wattage alone.

Side-by-side facts

Energy, Output and Recharge.

Published specifications plus calculated runtime examples. Hours are estimates, not measured product results.
MetricBLUETTI Elite 200 V2EcoFlow DELTA 3 MaxJackery Explorer 2000 v2
Rated battery2,073.6 Wh2,048.0 Wh2,042.0 Wh
Continuous AC2,600 W total2,400 W total2,200 W total
Maximum solar input1,000 W500 W400 W
Cell chemistryLiFePO₄LFP / LiFePO₄LiFePO₄
120 W / planning hours12.96 h12.80 h12.76 h
300 W / planning hours5.18 h5.12 h5.11 h

BLUETTI Elite 200 V2

Rated battery2,073.6 Wh
Continuous AC2,600 W total
Maximum solar input1,000 W
Cell chemistryLiFePO₄
120 W / planning hours12.96 h
300 W / planning hours5.18 h

EcoFlow DELTA 3 Max

Rated battery2,048.0 Wh
Continuous AC2,400 W total
Maximum solar input500 W
Cell chemistryLFP / LiFePO₄
120 W / planning hours12.80 h
300 W / planning hours5.12 h

Jackery Explorer 2000 v2

Rated battery2,042.0 Wh
Continuous AC2,200 W total
Maximum solar input400 W
Cell chemistryLiFePO₄
120 W / planning hours12.76 h
300 W / planning hours5.11 h

Solar figures are input ceilings. Verify voltage, current, connector and panel configuration separately. Continuous output is the total shared limit, not an allowance for each outlet.

Choose by the job

When This Capacity Class Fits.

01 / HOME OFFICE

Cover the whole desk.

Add computers, monitors, router and lights. Measure the full setup and verify output timeouts and outage transfer behavior with your equipment.

02 / REFRIGERATOR + ESSENTIALS

Measure cycling energy.

Use a representative measured daily energy budget and add other loads. Check compressor startup against the exact power-station specifications.

03 / LONGER OUTAGES

Plan the next charge.

If your energy target exceeds the base unit, compare more storage or a dependable recharge pathway. Confirm model-specific expansion rather than assuming every 2 kWh unit accepts extra batteries.

Energy ≠ power

2 kWh Does Not Mean Two Hours.

Duration depends on the load. A constant 1,000 W draw gives 1.54 planning hours from the 2,048 Wh example. A constant 120 W draw gives 12.80 hours under the same assumptions.

ENTER YOUR LOAD ↑
Before checkout

Four Checks That Change the Decision.

Capacity & reserve

Compare the recommended target with base rated Wh. Include all connected loads and account for temperature, aging and any charge limit you use.

Running power & startup

Check simultaneous running watts and appliance starting demand separately. Boost modes are not substitutes for the normal continuous output rating.

Recharge & accessories

Count only reliable recharge during an outage. Include panels, compatible cables and adapters in the purchase. Check charging and pass-through limits in the exact manual.

Handling & total cost

Compare carried weight, storage space, delivered price and warranty terms. Rated price per Wh = complete comparable purchase price ÷ rated capacity; it does not measure efficiency or service quality.

Zaron methodology

The Calculation, Visible.

Measure energy loadAverage watts across the operating period, including device cycles.W
Set durationHours to cover before dependable recharge.h
Size storageRaw kWh divided by 0.90, then multiplied by 1.20.kWh
Verify outputContinuous running power, startup requirements and exact connection.W
120 W × 8 h ÷ 1,000 = 0.96 kWh raw energy
0.96 ÷ 0.90 × 1.20 = 1.28 kWh recommended battery
2,048 Wh × 0.90 ÷ 1.20 ÷ 120 W = 12.80 planning hours

90% efficiency and 20% margin are editable-model assumptions, not universal product performance. This calculator uses fixed assumptions and adjustable loads. It does not simulate exact inverter losses, low-load cutoffs, startup transients, battery aging or recharge. Fit is based on unrounded values; displayed numbers are rounded.

Sources & evidence

Read the Exact Specifications.

  1. BLUETTI Elite 200 V2 — official U.S. product page
  2. EcoFlow DELTA 3 Max — official U.S. product page
  3. Jackery Explorer 2000 v2 — official U.S. product page
Manufacturer specifications reviewed October 4, 2026. This is a capacity and output comparison, not a tested ranking. No fixed sale prices, independent ratings or affiliate tracking. Verify availability, warranty requirements, manuals and the exact model configuration before buying.
FAQ

Know What the Battery Can Cover.

What is a 2 kWh power station?

A portable battery with roughly 2,000 Wh of rated storage. Its continuous AC output is a separate specification and varies by model.

How long does a 2 kWh battery last?

Divide the planning energy budget by your average watts. The 2,048 Wh example gives 12.80 hours at 120 W or 5.12 hours at 300 W with our efficiency and margin assumptions.

Will it run a refrigerator for a day?

Use the refrigerator’s measured daily energy and include other loads. The 2,048 Wh example has a 1.536 kWh planning budget. Also verify compressor startup compatibility; capacity alone cannot establish suitability.

Can it run a heater or air conditioner?

Check continuous and startup power, then calculate energy for the intended duration. High-draw appliances can fit the output limit while emptying the battery quickly.

Can I add another battery?

Expansion is model-specific. Confirm supported batteries and connections in the exact manual; similar names and capacities do not establish compatibility.

Is this enough for whole-home backup?

Use a complete load inventory, sufficient energy and output, and a suitable approved connection arrangement. This portable base-unit comparison does not establish whole-home capability.