Room in a 2 kWh budget.
Illustrative office load. All three base capacities meet this energy target. Device compatibility and startup behavior still need checking.
More reserve for your essentials. Match the battery to your outage duration before choosing a model.
2 kWh describes stored energy. Continuous W describes available running power. They are different checks.
Battery target = average W × hours ÷ 0.90 × 1.20.
* Budget = rated Wh × 0.90 ÷ 1.20.
Full starting charge. No recharge assumed. 90% efficiency and 20% margin are planning assumptions. Average watts estimate energy; simultaneous running watts check continuous output. Starting surges still require a separate manufacturer check.
CHECK EACH MODEL’S FIT →Illustrative office load. All three base capacities meet this energy target. Device compatibility and startup behavior still need checking.
A constant 300 W load for eight hours exceeds every base capacity in this shortlist under the same assumptions.
A constant high-draw appliance may fit the running-power limit but exhaust the energy budget before the intended duration.
Three similar energy capacities, with different output and recharge limits. Use the fit results to narrow the shortlist for your own inputs.
Compare when simultaneous running power matters. Confirm startup requirements and connector limits for the exact load.
Compare this exact base model and its ports. DELTA 3 Max Plus is a different variant; check the full name before ordering.
At a listed 17.9 kg, this is the lighter base unit of these three. Check handling, charging inputs and the full accessory package.
Generic illustrations, not product photographs. Specifications reviewed October 4, 2026. No hands-on testing or universal winner is claimed. Check current availability and the exact model variant.
Calculated planning runtime for a 2,048 Wh base battery. These constant-load illustrations include efficiency and reserve.
At very low loads, standby losses can reduce actual runtime more than this simplified model predicts. For cycling appliances, use a measured average rather than the running wattage alone.
| Metric | BLUETTI Elite 200 V2 | EcoFlow DELTA 3 Max | Jackery Explorer 2000 v2 |
|---|---|---|---|
| Rated battery | 2,073.6 Wh | 2,048.0 Wh | 2,042.0 Wh |
| Continuous AC | 2,600 W total | 2,400 W total | 2,200 W total |
| Maximum solar input | 1,000 W | 500 W | 400 W |
| Cell chemistry | LiFePO₄ | LFP / LiFePO₄ | LiFePO₄ |
| 120 W / planning hours | 12.96 h | 12.80 h | 12.76 h |
| 300 W / planning hours | 5.18 h | 5.12 h | 5.11 h |
Solar figures are input ceilings. Verify voltage, current, connector and panel configuration separately. Continuous output is the total shared limit, not an allowance for each outlet.
Add computers, monitors, router and lights. Measure the full setup and verify output timeouts and outage transfer behavior with your equipment.
Use a representative measured daily energy budget and add other loads. Check compressor startup against the exact power-station specifications.
If your energy target exceeds the base unit, compare more storage or a dependable recharge pathway. Confirm model-specific expansion rather than assuming every 2 kWh unit accepts extra batteries.
Duration depends on the load. A constant 1,000 W draw gives 1.54 planning hours from the 2,048 Wh example. A constant 120 W draw gives 12.80 hours under the same assumptions.
ENTER YOUR LOAD ↑Compare the recommended target with base rated Wh. Include all connected loads and account for temperature, aging and any charge limit you use.
Check simultaneous running watts and appliance starting demand separately. Boost modes are not substitutes for the normal continuous output rating.
Count only reliable recharge during an outage. Include panels, compatible cables and adapters in the purchase. Check charging and pass-through limits in the exact manual.
Compare carried weight, storage space, delivered price and warranty terms. Rated price per Wh = complete comparable purchase price ÷ rated capacity; it does not measure efficiency or service quality.
90% efficiency and 20% margin are editable-model assumptions, not universal product performance. This calculator uses fixed assumptions and adjustable loads. It does not simulate exact inverter losses, low-load cutoffs, startup transients, battery aging or recharge. Fit is based on unrounded values; displayed numbers are rounded.
A portable battery with roughly 2,000 Wh of rated storage. Its continuous AC output is a separate specification and varies by model.
Divide the planning energy budget by your average watts. The 2,048 Wh example gives 12.80 hours at 120 W or 5.12 hours at 300 W with our efficiency and margin assumptions.
Use the refrigerator’s measured daily energy and include other loads. The 2,048 Wh example has a 1.536 kWh planning budget. Also verify compressor startup compatibility; capacity alone cannot establish suitability.
Check continuous and startup power, then calculate energy for the intended duration. High-draw appliances can fit the output limit while emptying the battery quickly.
Expansion is model-specific. Confirm supported batteries and connections in the exact manual; similar names and capacities do not establish compatibility.
Use a complete load inventory, sufficient energy and output, and a suitable approved connection arrangement. This portable base-unit comparison does not establish whole-home capability.